Warehouse Heavy Duty High-Density Push Back And Drive-In Pallet
Racking System
In warehouses, high space utilization is always the pursuing goal
for cost-saving and profit-increasing. Selective pallet racks
possess excellent selectivity and accessibility but may not satisfy
many warehouse owners' calling for condensed rack arrangement.
When choosing between VNA racking, push-back racking, and drive-in
racking, the latter two solutions may confuse customers since they
have a lot in common. To make a wise choice, learning more
knowledge of these two racks will help a lot.
Comparison between pushback and drive-in racks
| Pallet rack | Drive in rack | Push back rack |
| Storage density | High storage density | High storage density |
| Product rotation | Relatively slow stock rotation | Relatively fast stock rotation |
| Selectivity | Limited products selectivity | Individual pallet selectivity is available |
| Cost | $$ | $$$ |
Similarities of push-back rack and drive-in rack
• Obviously, both push-back rack and drive-in rack cut redundant
aisles providing more compact pallet position layouts.
• Push-back rack and drive-in rack share similar space utilization
rates.
• In these two racking systems, consecutive upright frames are
connected by top beams forming uninterrupted storage bays.
• The material handling in both systems follows Last-in/First-out
principle.
Differences between push-back and drive-in racks
• Drive-in racks use support rails instead of horizontal beams for
pallet loads holding; while in push back system, pallet loads are
stored on carts with wheels.
• Forklifts in the drive-in system have to drive into the rack's
structure for product storing and picking; while push-back
forklifts only work at the end of the rack.
• Push-back racks take advantage of gravity force by designing
inclined rails with a series of nested carts where automatic
product picking can be reached; while in drive-in racking,
forklifts will should all the responsibilities.
• In drive in the system, products can store 8 to 10 pallet depths;
while in push-back racking, pallet load depth is usually less than
6 pallets.
• Push-back racking is more efficient and labor-saving compared to
drive-in racks since gravity-fed carts are involved.
• Having forklifts never entering the design of the rack, push back
system improves the warehouse safety greatly; while drive-in the
system needs more protection accessories to the racks due to the
strong possibility of crashing.
• In pushback system offers better selectivity since each pallet
load can be picked separately; while drive-in pallet racks are more
suitable to large quantity products with limited SKUs.
• Since push back system is engineered with extra carts, the cost
of it is more expensive than drive-in racks.
If you try to pick between the drive-in rack and push-back rack
systems, all the factors mentioned above should be carefully
considered. If you still have doubts and don't know what to do,
contacting Ironstone professional engineers is always a wise
choice.
