Automatic Mobile Radio Shuttle Racking System For Save Space
Radio Shuttle Racking System is a storage system for storing and
managing large volumes of goods. It is a high-density storage
solution, typically used in warehouses and logistics centers,
designed to improve storage efficiency and operational
effectiveness.
The basic principle of the Radio Shuttle Racking System is to use
an electric shuttle (radio shuttle) to move goods between racks.
The shuttle is a robot with the ability to travel autonomously,
carrying and moving goods. It is battery-powered and operated by
remote control or control system.
The Radio Shuttle Racking System works as follows:
►First, the goods are placed on one side of the rack and pushed
into the system by a forklift or other handling equipment.
►The shuttle moves automatically over the racks and carries the
goods from one side to the other. It can move vertically above and
below the shelves to access the different shelf levels.
►The shuttle stops at the target location and places the goods in
the correct position according to the system control commands.
►The operator can use a remote control or control system to control
the shuttle and instruct it to perform specific tasks, such as
picking up or putting away goods.
Benefits of the Radio Shuttle Racking System include
1. High storage density: Because the shuttle can move between racks, it maximizes the use
of warehouse space and provides higher storage density.
2. Efficient operation: Shuttles can perform handling tasks quickly and accurately,
greatly improving the efficiency of warehouse operations.
3. Reduced manual handling: The Radio Shuttle Racking System reduces manual labor and
operational risk compared to traditional manual handling methods.
4. Flexibility: Shuttles can move goods between racks as needed, accommodating
different sizes and weights of goods.
Radio Shuttle Pallet Rack Components
Specifications of Radio Shuttle Rack
| Item | Basic Data | Remark |
| Type | High version: TDRII-A-1012-1.5T | |
| Appropriate Pallet | Width:1016mm Depth:1219mm | Entry: 1016mm |
| Max Load Capacity | Max 1500kg | |
| Move | Speed | Vmax empty:1.5m/s,Vmax full:1.0m/s | |
| Acceleration | ≤0.5m/S2 | |
| Motor | Brushless servo motor: 48VDC 600W | Imported from America |
| Servo Driver | Brushless servo driver | Imported |
| Lift | Lift Height | 40mm | |
| Motor | Brushless motor: 48VDC 500W | Imported from America |
| Positioning/Accuracy | Move Positioning: laser sensor | Germany P+F/SICK |
| Pallet Positioning: laser sensor | Germany P+F/SICK |
| Lift Positioning: proximity switch | Germany P+F |
| Object Detection | Background suppression photoelectricity | Germany P+F/SICK |
| Control System | Programmable controller: S7-200 PLC | Germany SIEMENS |
| Remoter | Work frequency: 433MHZ; Communication distance: at least 100m if in an open environment. | Imported customized IMT |
| Two-way communication, with LED display |
| Temperature:-40℃~+80℃ IP67 |
| Power Supply | Lithium iron phosphate power battery | Domestic, high quality |
| Battery Parameter | 48V,30AH; running time:≥8h; charging time: 3h; charge times:1000 | Maintenance-free |
| Speed Control Mode | Servo control, constant torque at low speed | |
| Shuttle Control Mode | Remote control | |
| Running Noise | ≤60db | |
| Painting Requirements | The frame (black) Others (light gray) | |
| Ambient temperature | Temperature: 0℃～50℃ Humidity: 5% ~ 95% (no condensation) | |
| Anti-collision Device | A polyurethane cushioning strip and anti-collision sensor are
installed on the end surface | |
Before installing the Radio Shuttle Racking System, the following
factors need to be considered:
1. Warehouse space: Evaluate the available space and layout of the warehouse to
determine the suitable area for the installation of the Radio
Shuttle Racking System. Make sure there is enough space to
accommodate the racking system, shuttles and cargo handling areas.
2. Cargo attributes: Consider the size, weight and characteristics of the cargo. the
Radio Shuttle Racking System needs to accommodate different types
of cargo, so you need to ensure that the design and load capacity
of the racking system can meet the requirements of the cargo.
3. Cargo flow: Evaluate the flow of cargo and handling requirements. Based on the
frequency of cargo movement and handling speed, determine the
number and configuration of shuttles required to ensure the system
can meet the expected operational efficiency.
4. Power and charging requirements: The Radio Shuttle system uses battery power, so the battery life
and charging needs of the shuttles need to be considered. Determine
the location of charging stations and the configuration of charging
facilities to ensure that the shuttles can be charged in a timely
manner and remain operational.
5. System Integration: Consider the integration of the Radio Shuttle Racking System with
other storage equipment and systems. For example, interfaces with
warehouse management systems (WMS) or automated equipment to enable
data exchange and collaborative operations.
6. Security considerations: Ensure the security of the Radio Shuttle Racking System. This
includes the safety design and features of the shuttle, such as
collision avoidance devices, safety sensors, and emergency stop
buttons, as well as training for operators and compliance with
safety standards.
Warehouse Solution Designing
Ironstone has its own design consultants who are experienced in
offering you optimal storage solutions for optimizing your material
and information flow. Based on engineering design, computer
modeling, and CAD software design, we have successfully provided
thousands of storage solutions for our customers. Through a win-win
combination, we can assure you of your success in managing your
goods by means of our professional technology and risk management.
FAQ
(1) Q. What is your minimum order quantity?
You only need to purchase one piece and we can ship it to you.
(2) Q. How do I buy?
You can email us directly and we will contact you by email in time.
(3) Q. Are you a factory or a trader?
A. We are 100% factory.
(4) Q. Can you OEM / ODM?
We provide OEM / ODM service. If you have a need for this, you can
send your logo to us directly, and we will print your perimeter
label on the product.
(5) Q. What certification do your products pass?
We're ISO9001 certified company. Rack systems are strictly designed
and produced based on CE and AS4084:2012 standards for storage
racks, and comply with FEM and RMI standards.
(6) Q. What are your payment methods?
We support T/ T .L/C PayPal and other payment methods.
(7)Q. What is the delivery time?
Usually, it takes 25 to 30 days. But the exact delivery time is
different for different order quantities.
